Review of Aspire PockeX Box kit

If you talk to vapers who have been vaping for more than a year, you can hear some interesting opinions, for example, that many of them refuse from quite powerful box mods and sabom tanks, giving preference to sub-mods or small mods with cigarette holders. Therefore, it is quite logical that manufacturers regularly replenish this segment of the market with appropriate devices. The Aspiresig company has presented its developments in the above segments more than once, and almost immediately after their release they became sales hits and are successfully used by vapers all over the world. Deciding to remind of itself once again, the company presented Aspire PockeX Box kit” a hybrid of a small box mod, MTL-tank and POD-system, which will definitely find its buyer.

General Information

Aspire PockeX Box kit” is a small starter kit consisting of a battery pack powered by a powerful built-in battery and a built-in tank designed for the use of replaceable vaporizers. The new starter kit looks quite original directly in the rectangular battery pack is located cartridge, and this device is made very neatly and strictly. The mod is equipped with ASP chipset, which provides a full set of protection for the device, but does not allow you to change the operating power. Built-in cartridge of small volume is designed for the use of replaceable vaporizers of PockeX series with high resistance, so it can be used as an MTL-tank or for vaping liquids based on salt nicotine. Aspire PockeX Box kit” is available in five colors: black, gray, blue, blue and burgundy.

Equipment

We can not say that this device is packed in any special way, everything is simple, banal and standard:

PockeX Box Device battery pack;

2.6ml PockeX Box Tank cartridge;

6 “Omega vaporizer; Coil (pre-installed);

2 “Omega Vaporizer; Coil;

Spare Glass;

Spare Orings;

USB Type-C cable;

User’s Manual.

PockeX Box Device box mod

It’s not quite right to call PockeX Box Device a box mod, but rather a battery pack similar to those used in sub-mods or POD-systems. And the device itself looks more like a modified POD-system rather than a separate mod and tank. If you look at Aspire’s product range, you can find the PockeX pipe mod, which the company’s developers turned into the Aspire PockeX Box kit after numerous requests from users.

The PockeX Box Device battery pack is made very simply and to some extent strictly a neat rectangle, rounded on one side and with beveled corners on the other. Such a shape is interesting because in the hand such a device sits just fine, and adds plus to the ergonomics of the surface with fine perforations. To say that PockeX Box is miniature is not possible, as its dimensions 86.4*50.9*26.5 are comparable to the dimensions of a full-fledged box mod like Pico or Swag, and it weighs not so little almost 150 grams.

The Aspire PockeX Box kit” is powered by a built-in 2000mAh battery, so it has a pretty good battery life, especially considering the 0.6 ohm and 1.2 ohm vaporizers used. The battery is charged using the USB Type-C connector, located on the semicircular edge of the device, with a current of 2A, so you can fully charge the battery in an hour.

An important feature of Aspire PockeX Box kit” is that it is equipped with an ASP chip, which provides not only a full set of protections, but also the operation of the device in bypass mode. The control element is only one fire button located on the side panel. You can find out how charged the battery is and what voltage is currently supplied to the vaporizer by looking at the LED under the charging connector, which changes its color.

PockeX Box Tank cartridge

The PockeX Box Tank is also hard to call a full-fledged tank, as it has a non-removable base, in which the glass and vaporizer are installed, and then everything is covered with a top cap with a 510 drip tip.

This device uses two types of vaporizers 0.6 ohm stainless steel and 1.2 ohm Fehral. The spirals in the vaporizers are standard, not mesh, but this is due to the fact that the device is initially positioned as MTL.

The device has a blowing adjustment, realized with the help of a traditional rotary ring located in the upper part of the cartridge.

The developers of PockeX Box Tank have provided a rather interesting system of refilling the cartridge. In order to refill it you just need to slide the top cover of the tank in a straight line and pour 2.6 ml of liquid into the medium-sized hole.

Conclusions and impressions 

Frankly speaking, Aspire PockeX Box kit” is a rather strange and at the same time very interesting device, which can be appreciated only by connoisseurs, because in comparison with most modern sub-mods it loses in functionality and performance. But at the same time the device is characterized by autonomy and almost full-fledged MTL draw.

Advantages and disadvantages

Disadvantages

Small volume of the tank;

Lack of power adjustment.

Advantages

Original design;

Good ergonomics;

510th drip tip;

Capable battery;

Fast charging;

Easy operation;

Reliable chipset;

Two types of vaporizers;

Adjustable airflow;

Easy refilling.