Review of Etna MTL RDA by Digiflavor

Practice shows that 80% of vapers who started vaping liquids with various flavors are former smokers who got rid of their addiction. But a habit is a habit tight cigarette puff and a little like many people much more than huge clouds. That’s why atomizers designed for cigarette puff have not lost relevance for many years. And if initially cigarettes were only tanks, now there are more and more MTL-format drippers on the market. The Digiflavor company is constantly watching to stay on the crest of the wave, so it is not surprising that not so long ago it released its own variant of the cigarette puff drip – Etna MTL RDA. This drip atomizer will definitely interest all cigarette fans, because in addition to an interesting design and quite specific maintenance, it is able to give a great flavor that vapers seek.

General Information

The Etna MTL RDA by Digiflavor is a compact single coil drip atomizer with an airflow that is not controlled by rotating the ring or dome, but by changing the nozzles. The small size of the drip is due to the fact that the volume of the evaporation chamber is reduced for maximum flavor transfer, as well as for use on stealth mods. online vape shop australia The fact that the drip is single-coil is quite logical, as for cigarette puffing there is no need to create a large vaporization area, but the blowing system is implemented a bit non-standard to change the diameter of the air inlet you need to manually change the nozzle. However, Digiflavor offers seven variants of nozzles with different diameters and configurations. Etna MTL RDA by Digiflavor can be purchased in six colors gold, blue, black, gun metal, rainbow and steel.

Equipment

If we talk about Etna MTL RDA kit, we can take off our hats in front of Digiflavor company, no one has ever packed such devices of this type. It’s enough to open the box and puppy delight will immediately cover the vaper, as it contains:

Etna MTL RDA drip atomizer with a pre-installed 2*0,8mm hole gauge;

Six (!) pre-wound spirals of different types;

A 22 mm;

T-shaped screwdriver;

Hexagon;

Spare drip tip;

Squonk pin;

Two nozzles with holes 3*0,8 mm and 1*1,2 mm;

Spare orings;

Spare screws;

Cotton;

User’s Manual.

Appearance and Design

MTL drip tips presented to date are in most cases very small in size, and Etna MTL RDA by Digiflavor is no exception. Its diameter is 18 mm, and such miniaturization is not accidental – the small volume evaporation chamber allows you to keep the taste of vapor as pure as possible and prevent it from being cut by air. But we can’t say that such dimensions negatively affect the appearance of the drip, as it is designed for compact box mods, not RX300. In order for the drip to look logically on box mods, it is completed with a 22mm beauty ring.

The appearance is quite austere and without any special excesses, but there is one point worth paying attention to on the side surface there is an air inlet hole, specially decorated with bright brass. It is difficult to say what the manufacturer wanted to emphasize, but this element looks quite interesting.

Etna MTL RDA by Digiflavor is made of stainless steel and can be made in six colors. The two drip tips, which the drip is equipped with, are made of translucent plastic, and they differ slightly in height. The drip tips are 510-type, so the vaper can use any variants he likes without much difficulty.

Base, blowing and peculiarities of use

Naturally, the Etna MTL RDA by Digiflavor has a single-coil base, as this is an MTL device after all. The deck will not cause any questions it is a standard two posts, offset to the edge to ensure that the coil is exactly in the center. The spiral is attached using two slotted screws screwed in from the top. It should be remembered that this arrangement of posts limits the number of coil turns.

A separate attention should be paid to the blowing system, which is to some extent the pride of this drip. The spiral is blown from the bottom, and it is regulated not by turning the ring or the dome, but by replacing the jets.

The manufacturer offers seven variants of plugs with different number of holes of different diameters so that the vaper can find his Zen in blowing. Changing the jets requires either bending the coil upwards or doing the process without the coil. And the replacement process is as simple as unscrewing the corresponding screw with a hexagon and replacing one vaporizer with another.

The tub is not particularly large, as the Etna MTL RDA by Digiflavor itself is small, but for those who want autonomy there is a squonk pin provided.

Conclusions and impressions

Despite the fact that there are some questions about the Etna MTL RDA by Digiflavor regarding the change of jets, the drip has turned out to be a very decent one, and in many respects. This is a real MTL-drip, which will appeal to many vapers, first of all, because of its flavor delivery and variability of blowing, and then because of the design features.

Advantages and disadvantages

Disadvantages

The airflow can only be adjusted by changing the nozzle;

For a quick change of the nipple it is necessary to bend up the coil, from which it can break.

Advantages

Strict appearance;

Very rich equipment;

Spherical processing of the dome;

Easy spiral installation;

Seven variants of blowing due to the change of jets;

Possibility of use on squonks;

Excellent flavor.