Review of Hellvape Hellbeast RDA

Despite the fact that many manufacturers have reoriented their production to the production of submods and POD-systems, the number of vapers who prefer good old vape machines is not decreasing. The reason for the popularity of dririp atomizers is that you can get the richest flavor and scent with them. For many vapers, one of the iconic drip atomizers was the Hellvape Dead Rabbit, which became somewhat revolutionary. After quite a long silence in this area (do not take the Dead Rabbit V2 into consideration as it does not differ much from V1) the company Hellvape released a rather interesting and original drip Hellbeast RDA, which translates as Hellbeast. We can say for sure that the company has worked on the glory of the original, comfortable, full of taste and scent drip.

General Info

Hellvape Hellbeast RDA is a compact vape for 1 or 2 spirals with the original top side blowing system that allows you to get Excellent flavor and scent. The design of the device is quite strict, but at the same time there are some original solutions non-standard drip-tip and slightly raised dome. Depending on the vaper’s preferences it is possible to install one or two spirals, and the racks are not located in one line, but somewhat displaced, making it very convenient to serve the drip. Blowing in the drip top-side, so there will be no problems with flavor and bulk. You can buy Hellvape Hellbeast RDA in seven colors matte black, all black, steel, gun metal, gold, blue and rainbow.

Kit

That’s what the Hellvape Hellbeast RDA can’t complain about, it’s the kit that the manufacturer put in the box everything a vaper might need to maintain the vape. In the red-orange cardboard box the vaper waits:

Hellbeast RDA drip atomizer;

Squonk pin;

Two pre-wound 0.37 “Omega spirals; NI80 Fused Clapton Coil;

Cotton;

Screwdriver;

Hexagon;

A tool for trimming coil stems;

Spare screws;

Replacement O-rings;

Genuine Hellbeast sticker;

User’s Manual.

Appearance and design

In its time the appearance of Hellvape Dead Rabbit RDA made a small revolution in the segment of drips, as the top blow-off allowed to get a very good flavor transfer. It is worth saying that this drip is still in demand today, both the first and the second version. But the developers of Hellvape decided to create a no less interesting drip, which can confidently compete with the Dead Rabbit – Hellvape Hellbeast RDA.

Hellvape Hellbeast RDA looks rather strict and laconic, from the decor there are only notches on the top of the dome and the Hellbeast logo applied on the side surface of the skirt. The diameter of the vial is 24mm so it is suitable for almost all box mods and mechanical mods.

Hellvape Hellbeast RDA drip-type is quite interesting, it is 810th, non-ringing, made in original cone-shaped form-factor. You can always replace the drip-tip with any other from your collection if you wish.

Case, airflow and usage features

Vapers who have used the Hellvape Dead Rabbit RDA are already used to the fact that the spirals are installed horizontally with side fixation of the legs. In Hellbeast RDA the installation principle is the same, but the legs are not in one line, but slightly shifted. This design solution is interesting because it is more convenient and comfortable to install the spirals.

The racks have quite large holes, so fat spirals can be installed without much difficulty. Fixation of spirals is made with slotted screws, located parallel to the base of the drip. You can install one or two spirals if you want to.

The pod in Hellvape Hellbeast RDA is not particularly deep, but with the skirt on, you can pour up to 1.5-2 ml of liquid into it. But you can always install the complete squonk pin and use the drip on appropriate devices.

The blowing system deserves special attention. It is implemented quite originally in the skirt on both sides there are seven vertical slots, top cap has 72 holes with diameter 1,2 mm, which are located in three rows.

Depending on how tight or loose a draw the vaper wants, it is possible to set the holes against the slots, and you can make one, two or three rows of holes. This design solution (the use of small holes) has a positive effect on flavor and fill, as the air flows to the spirals in small streams.

Conclusions and impressions

We can confidently say that Hellbeast RDA is another worthy product from Hellvape, which will surely appeal to vapers looking for good flavor and scent. With the ease of operation and the variation of the original blowing you can find the best draws and the flavor transfer will be top notch.

Advantages and disadvantages

Disadvantages

Shallow pod.

Advantages

Large selection of colors;

Strict design;

24mm fit;

Squonk pin;

The original 810th drip tip;

Easy installation of spirals and laying the absorbent cotton;

Innovative air vents with 72 vents;

Excellent flavor and scent.