Review of Hellvape Passage RDA
No matter what interesting tankomizers were invented by the manufacturers, drip sticks have been holding their positions for many years. The reason for this is very simple: in most cases, the flavor transfer is much higher than that of the tanks due to their design. Many vapers are not afraid of the moment with constant refills, so you can use a drip atomizers at squonk boxes or buy a special dispensing bottle. In any case, drip was and will be relevant, so in the range of many manufacturers you can find a large selection of such devices. The company Hellvape not once pleased vapers with their vape atomizers “ndash;just remember Dead Rabbit, Drop Dead or Rebirth all of them immediately after appearing on the market became a hit of sales. But this does not mean that the company’s specialists have stopped Not so long ago was presented the new Hellvape Passage RDA which uses an innovative blowing system, the original system of installation of spirals and modern design. We can say at once that this device will be liked by many vapers because you can safely experiment with windings and blowing.
General Info
Hellvape Passage RDA is a drip atomizer which is designed for counter installation of two spirals, with an innovative system of side blowing with channels and punched holes that gives the vaper an excellent flavor transfer and boost. The design of this vape loosely resembles previous models, it looks more original and a little pretentious, but it looks great on any mechanical or box mods. australian vape shop melbourne The design of the deck is designed so that the vaper has no special restrictions on the installation of spirals. In order to provide a good taste, the manufacturer provides side point blow, but the air intake will be top, so the drip can be safely attributed to non-pouring. The manufacturer offers Hellvape Passage RDA in nine (!) colors Gunmetal, Matte Full Black, Piano Full Black, Rainbow, Black, Steel, Blue, Gold and Purple.
Kit
The specialists at Hellvape have done their best to complete this model of drip kit, so in a fairly simple cardboard box the vaper will find:
Passage RDA drip atomizer;
Additional 810th drip-type;
Squonk pin;
Adapter for 510-type drip-types;
Slotted screwdriver;
Hexagonal screwdriver;
Replacement O-rings;
Replacement screws;
Company sticker;
User’s Manual.
Design and appearance
Naturally, most vapers are familiar with Hellvape’s products from other minimalist style vape turntables, but when creating the Passage RDA, the designers and engineers of the company decided to change it a bit. Externally the drip became more interesting. In the bottom it has a diameter of 24 mm, and a little higher the diameter increases to 25 mm. Such a solution allows you to create several tiers, and it looks very good.
The developers decided to equip Hellvape Passage RDA with an updated drip-tip in addition to the standard 810th from translucent plastic in the kit there is an acrylic drip-tip with a metal ring. This ring is the pride of the company and uses silver inclusions thanks to which the tip will not accumulate and grow microorganisms (it might be just a marketing ploy, but it sounds cool).
Case, airflow and usage features
Many vapers are used to Hellvape devices using vertical installation of spirals with horizontally placed screws. But in the Passage RDA it was decided to change the concept a little bit two massive vertical racks for horizontal installation of spirals.
It is worth saying that this design is interesting because each of the racks is equipped with a vertical slotted screw and a pressure plate that moves up and down inside the rack. Thanks to this design, you can fasten the legs of the spirals both with the screw and under the pressure plate.
It uses a rather traditional system of counter installation of spirals, which may seem complicated to beginners, but in fact the builds are not so difficult to install. A special attention deserves the fact that you can install fat spirals and experiment with them without much difficulty.
Laying absorbent cotton will not cause questions all clear and fast. The pod is not the biggest, but you can always install a squonk pin and use the device on appropriate devices.
The blowing system in the Hellvape Passage RDA is quite interesting and original, as it is not just holes in the side skirt and top cap, which must be combined. In the skirt the air intake hole is quite high, and in the top cap the holes for air supply to the coil are lower, so the air through special channels goes down, and only then hits the coil, blowing it all over the side surface in small streams.
Conclusions and impressions
We can definitely say that Hellvape Passage RDA is a worthy continuation of Hellvape’s series of vapes that will please many vapers. The easy installation of the spirals and the original blowing allows you to get Excellent flavor and scent.
Advantages and disadvantages
Advantages
Installation of spirals can be a bit complicated for a beginner;
It is difficult to find the optimum blowing mode.
Advantages
Original design;
Great Kit;
Branded anti-bacterial drip-tip;
Ability to install volumetric spirals;
Easy installation of coils;
Original airflow design;
Excellent flavor and scent.