Review of Vandy Vape Kylin M AIO Kit

As soon as the Chinese government loosened the quarantine a little bit, the manufacturers immediately began to massively present vaping devices that had been developed in their secret laboratories. It is no secret that today the most popular among vapers are sub-mods, which every self-respecting vape device manufacturer considers to be its duty. The company Vandy Vape long enough to refrain from the release of such devices, but still could not stand and presented its version of sub-mod Kylin M AIO Kit. It should be said at once that Vandy Vape once again surprised vapers as they offered a really interesting and versatile device that can surprise even the most skeptical after unpacking it. The device has everything that most vapers would like to get, so we can say for sure that the Vandy Vape Kylin M AIO Kit will definitely become a hit of sales.

General Info

Vandy Vape Kylin M AIO Kit is a medium sized sub-mod that runs on a 18650 battery, equipped with a proprietary chipset and two cartridges for vaporizers and a serviced base. The form factor in which the device is made is quite usual for this segment of devices, so it will not cause any complaints. In the device is installed proprietary chipset Vandy chip, allowing you to get the power up to 70 watts in varivatt mode. An important feature is the two cartridges to work with vaporizers and serviced base for installing a grid or spirals. Buy Vandy Vape Kylin M AIO Kit can be in four versions – Wormhole, Fantasy forest, Silver moonlight, Polar phantom.

Kit

It is hard to call the company Vandy Vape greedy in terms of completing their devices, but this device strikes by the fact that our Chinese friends put in a box, in which the vaper will find:

Kylin M AIO Device battery pack;

Kylin M AIO DIY Pod (5mL);

Kylin M AIO Pod (2.5mL);

Kylin M AIO Coil (0.3ohm);

Kylin M AIO Coil (A1 M 0.2ohm);

Kylin M AIO Coil (SS316L M 0.15ohm TC);

Kylin M AIO Coil (Dual M 0.15ohm);

Kylin M AIO Coil (Ni80 M 0.15ohm);

Triple Fused Clapton Coil (0.23ohm);

M Wire Rod;

Two Cotton Plates;

Five Steel Wires;

Wire Heating Tool;

Replacement screws and fingerlings;

USB QC Type-C Cable;

User’s Manual.

Kylin M AIO Device Battery Pack

If you look at the range of Vandy Vape, you can find in it drips, tanks, starter kits, box mods and squawks, but there are no sub-mods yet. The company clearly decided that it was time to conquer and this segment of the market, and not just release some device, and immediately hit the competitors hard, presenting a device in which everything will be taken into account. And by releasing the Kylin M AIO Kit, Vandy Vape has succeeded.

Externally Vandy Vape Kylin M AIO Kit looks quite standard devices of this format presented a lot. Dimensions device is not the smallest 100.8 * 46.5 * 24.5 mm, so it is more like a small box mod, but it sits well in your hand. The device is made of zinc alloy with a removable side panel, and the manufacturer offers quite original design panels, so the vaper will definitely be able to stand out.

The maximum power of the Kylin M AIO Device battery pack is 70 watts, and it is provided by a traditional 18650 battery, which is installed under the removable, held by magnets, panel. If necessary, the battery can be charged using the USB Type-C connector, located under the same panel, with a current of 1.5A.

Controlled by Vandy Vape Kylin M AIO Kit proprietary chipset Vandy chip, which, according to the manufacturer, is protected against moisture. The chipset is simple enough, allowing the vaper to select only the operating power and monitor the battery level / coil resistance on a small monochrome display, but this is unlikely to upset anyone.

Kylin M AIO Cartridge

It is worth paying tribute to Vandy Vape, which corrected the biggest flaw of 90% of manufacturers, offering to buy a serviced base for the sub-mod additionally. It comes with two cartridges at once for vaporizers and with RBA base.

The Kylin M AIO Pod cartridge is designed for installation of a vaporizer with 0,3 ohm grid, and only one option is available at the moment. The design of the cartridge is such that it has a capacity of 2.5 ml because of the vaporizer, which isn’t too bad.

The second cartridge Kylin M AIO DIY Pod is more interesting and original, it is crowned by a base made in the form of two pressure plates with a ceramic spacer in the middle. Thanks to this design you can install both one coil and mesh, and there will be no problems with installation. An important feature of the cartridge is that you do not need much cotton because it has steel cables inside which the liquid flows from the 5 ml tank to the cotton.

To refill the cartridges it is necessary to remove the side panel, open the small silicone plug and pour the liquid into the tank.

Not to forget that both cartridges have adjustable airflow under resin drip-tip.

Conclusions and impressions

I would like to say that Vandy Vape in the Kylin M AIO Kit managed to implement what has always been necessary for vapers RBA-base in the kit, replaceable battery, blowing control. The fact that there will be a lot of fans of this device in the near future is an undeniable fact.

Advantages and disadvantages

Disadvantages

Only one type of vaporizer;

Minimal functionality.

Advantages

Original design;

18650 interchangeable batteries;

Fast charging;

Easy operation;

Moisture-proof chipset;

Two cartridges included;

Serviceable base for mesh and coil;